Full smartphone
control.
Manage your DBLG2 system from a compatible personal smartphone. Access your glucose readings and insulin information in the app, after the required training.3
Your system, within reach.
Automated insulin delivery app
Your sensor and insulin pump, connected through the DBLG2 app.
DBLG2 brings automated insulin delivery to a compatible smartphone*. Its algorithm uses your glucose readings and individual settings to adjust insulin delivery from a compatible pump every five minutes. For adults living with type 1 diabetes.
*Use requires a compatible smartphone, glucose sensor and insulin pump. Smartphone compatibility may vary by country.
Explore the screens with simulated data. No sensor or pump needed.
Get it on Google Play Demo only · Not a medical device · Android · Germany & the NetherlandsDBLG2 · Everyday benefits
Smartphone control. Clinical evidence.
Flexible meal announcements.
Manage your DBLG2 system from a compatible personal smartphone. Access your glucose readings and insulin information in the app, after the required training.3
Your system, within reach.
Obs34 · DBLG2
74.1%1
Mean time in range (70–180 mg/dL).
Last 6 weeks · Kaleido Insulin pump + Dexcom G6 CGM.
Mean time below 70 mg/dL.· Last 6 weeks on DBLG2.
Meal announcements are no longer mandatory, though announcing meals may support better glycemic outcomes.2
You can also declare physical activity to help DBLG2 adapt insulin delivery before, during and after exercise.3
Meals, movement, everyday moments.
About these results. Obs34 was a small, non-randomized observational study of 20 adults with type 1 diabetes switching from DBLG1 to DBLG2, using Kaleido and Dexcom G6. Figures are means from the full analysis set during the last 6 weeks of each treatment period. DBLG2 met the prespecified non-inferiority criterion for time in range; superiority over DBLG1 was not demonstrated. These figures do not establish outcomes specifically when meals are unannounced. Individual outcomes may vary.
Glucose sensor01 · Measure glucose
Insulin pump03 · Deliver insulin
GlucoseUnderstanding DBLG2
The DBLG2 app, a glucose sensor and an insulin pump work together to adapt insulin delivery when loop mode is active.
Read the indications and contraindications ↓Readings from your compatible glucose sensor are updated in the app every five minutes. DBLG2 reassesses insulin needs with each new reading.
DBLG2 considers your personal settings, current and predicted glucose levels, declared meals and physical activities.
Loop mode increases or reduces the basal rate — the background insulin delivery. When there is a risk of high glucose, it can also send automatic correction boluses to the pump, taking into account the insulin still active in your body.
When low glucose is predicted: loop mode can temporarily suspend insulin delivery and may recommend rescue carbohydrates.
The glucose level used by DBLG2 to guide insulin delivery.
Default setting
110 mg/dLAvailable target settings
100 – 130 mg/dLTreatment settings should be reviewed with your prescribing healthcare professional.
| Setting | Default | Available range | Role |
|---|---|---|---|
| Glucose target | 110 | 100–130 | Guides insulin delivery adjustments. |
| Hypoglycemia threshold | 70 | 60–85 | Used for low-glucose management. A predicted fall below it can lead to temporary insulin suspension and rescue-carb recommendations. |
| Hyperglycemia threshold | 180 | 170–220 | Changes how high glucose is displayed. It does not determine insulin delivery; loop mode uses its own decision mechanisms. |
A target is not a time-in-range interval. The 70–180 mg/dL interval used in time-in-range reporting is different from the personal glucose target that guides the algorithm.
Meal announcements help DBLG2 match insulin delivery to your needs. A suggested meal bolus requires your confirmation; for a two-part bolus, only the first part needs confirmation. Without meal announcements, automated glucose management continues, but glucose control may be less optimal.
Declared physical activity helps loop mode adapt management before, during and after exercise. It can adjust the basal rate and/or correction boluses and, if needed, recommend rescue carbohydrates.
Zen mode raises the glucose target by 20 mg/dL by default. The increase can be set from 10 to 40 mg/dL, with a maximum resulting target of 150 mg/dL. Duration: 1–8 hours, with a default of 3 hours. The hypoglycemia threshold also rises by a fixed 20 mg/dL.
Night mode changes the triggering conditions of certain alarms and alerts during a defined nighttime period. It does not introduce a separate nighttime glucose target.
For the DBLG2 Android system with a compatible insulin pump and Dexcom G7, as described in the user guide supplied with your system. Discuss whether the system is suitable for you with your prescribing healthcare professional.
The DBLG2 system, issued on a medical prescription, is intended for patients with type 1 diabetes who are more than 18 years of age.
The total daily dose of insulin required must be less than 90 units (U).
The DBLG2 system is indicated for use with 100 U/mL rapid-acting insulin analog and is intended for single-patient use.
Training before use. Patients must be trained in the use of the system by a competent healthcare professional and/or distributor. Read the user guide before starting to use the system.
This medical device is contraindicated for the following people:
The safety and effectiveness of the DBLG2 system have not been tested or approved for the following categories of people:
MR unsafe. Do not wear any Dexcom G7 component during magnetic resonance imaging (MRI) or high-frequency electrical heat (diathermy) treatment. For a CT scan, the user guide specifies that the sensor must be kept outside the scanned area and covered with a lead apron during the scan.
Magnetic fields and heat could damage Dexcom G7 components, causing inaccurate sensor readings or preventing alerts. Without readings or alerts, a severe low/high glucose event could be missed. Follow the full device-specific instructions in the user guide.
This section does not replace the full user guide, its warnings and precautions, or training on the system.
Find the user guide for your system ↗Source: DBLG2 user guide, chapters “Purpose and intended users” and “Safety statements”.
Compatible systems

Glucose sensor
Measures your glucose continuously and sends readings to DBLG2.
Explore Dexcom G7
Automated insulin delivery app
by
Diabeloop
Runs on your Android smartphone and calculates your insulin adjustments every five minutes.
Check smartphone compatibilityInsulin pump
Delivers insulin according to the adjustments calculated by DBLG2.
Explore KaleidoIllustrations are not to scale.
Device compatibility and availability depend on your country and system configuration. Refer to the applicable DBLG2 user guide for the supported components.
Video tutorials
Explore the app and its features through six short videos, from your first overview to everyday use.

01 / Start here
Meet the DBLG2 system and take a guided tour of the app.
Watch the introduction
Explore the Home screen and its main features.
Find your way around Events and meal declarations.
Explore the System screen, device pairing and loop mode.
Get to know the alarm system and how it works.
Follow a step-by-step introduction to app initialization.

The Diabeloop community
Behind Diabeloop are people, experiences and everyday lives. DBLG2 brings personalized insulin delivery to a compatible smartphone.

Bring your glucose, insulin and daily events together. YourLoops helps you review your DBLG1 or DBLG2 data and share it with the people you choose — your healthcare team, family or friends.
For people using DBLG1 or DBLG2
For family and friends
For healthcare professionals
Bring someone you trust into the picture.
Automatically uploadedWith an internet connection and data transfer enabled.
No software to installOpen YourLoops in your web browser.
Protected health dataEncrypted data. Hosting certified under French health-data regulations.
For reviewing data and long-term trends. YourLoops is not intended for immediate action or to replace advice from your healthcare professional. Data availability depends on connectivity and data-transfer settings.

Your next step
Explore how DBLG2 could fit into your daily life. Discuss the next step with your healthcare team.
DBLG2 is available by prescription only.Your healthcare team can help you decide whether it is right for you.
Support & guides
Find answers about DBLG2 and YourLoops, from getting started to everyday use.
A new search explores both products. Use the product and topic filters to narrow your results.

Browse the questions below.
No answers found. Try a different keyword or search both products.
DBLG2 is a medical device for adult patients with type 1 diabetes, available on prescription only.
DBLG2 is a mobile application for automated insulin delivery. The software includes an algorithm called loop mode and interacts with a continuous glucose monitoring device (CGM) and an insulin pump through restricted Bluetooth® Low Energy connections.

DBLG2 System is a CE-marked medical device
DBLG2 is available with the Kaleido insulin pump and the Dexcom G7 in Germany and the Netherlands.
The DBLG2 system, issued on a medical prescription, is intended for patients with type 1 diabetes who are more than 18 years of age.
The total daily dose of insulin required must be less than 90 units (U).1
The DBLG2 system is indicated for use with 100 U/mL rapid-acting insulin analog and is intended for single-patient use.
Your Kaleido pump and insulin cartridges are only approved for use with Humalog® and NovoRapid® U100 insulins.
1 U: Unit (International Unit, also IU). Unit of measurement for insulin.
This medical device is contraindicated for the following people.
No MRI/CT/diathermy — MR unsafe: do not wear any Dexcom G7 component during magnetic resonance imaging (MRI) or high-frequency electrical heat (diathermy) treatment. However, it is safe to have a CT scan if you keep the sensor out of the scanned area and cover the sensor with a lead apron during the scan. The Dexcom G7 has not been tested in those situations when used during an MRI scan, diathermy, or in the scanned area of a CT scan. The magnetic fields and heat could damage components of the Dexcom G7, which may cause inaccurate sensor readings or prevent alerts. Without sensor readings or alerts, you might miss a severe low/high glucose event.
The safety and effectiveness of the DBLG2 system have not been tested or approved for the following categories of people.
You can download the DBLG2 app through the official app store, provided that you have a compatible smartphone (list available on Diabeloop's web site) with a compatible OS version, a medical prescription and an activation code.
DBLG2 is compatible with Android phones.
The list of compatible phones is available on Diabeloop's web site.
The DBLG2 app is compatible with Android operating systems 13 to 17.
No, the app cannot be used on two phones.
You can switch phones and reinstall the app on a new phone. However, installing the app on another phone will automatically deactivate the app on the original phone.
No, the app cannot be used on a tablet.
No, the Dexcom G7 app cannot be used when you use the DBLG2 app. If the Dexcom G7 app was previously installed on your phone, it needs to be uninstalled to avoid any conflict.
No, a caregiver cannot download the app to view content. DBLG2 is a medical device and should not be used without a prescription.
YourLoops allows users to share data with caregivers and healthcare professionals.
No, a healthcare provider cannot download the app to see how it works. DBLG2 is a medical device and should not be used without a prescription.
A DBLG2 Demo app is available.
The DBLG2 Demo app is an interactive simulation and a preview of the DBLG2 automated insulin delivery system. It simulates interaction with the system and provides an overview of the many features and benefits of the DBLG2 system.
Initialization refers to the app's setup. This is done after you've downloaded the app and is necessary to configure the app with your personal and medical information.
To initialize the app, the following prerequisites and information are necessary.
You need a medical prescription for the DBLG2 app.
You need to be trained to use the DBLG2 system and assisted by a healthcare professional trained to use the DBLG2 system.
You need the activation code, provided by your healthcare professional or distributor after your training.
Your smartphone must be compatible (list of phones available on Diabeloop's web site) and use Android operating systems 13 to 17.
Before launching the DBLG2 app, you must make sure your smartphone is connected to the Internet (Wi-Fi or mobile network). There are no specific settings required for the phone other than an internet connection; all permissions will be requested during setup.
You will need to enter the following information:
Your email address (used to create your activation code)
The activation code provided by your healthcare professional or your distributor
Your personal information: name, date of birth, gender
Your medical information (provided by your healthcare professional):
Weight, height and total daily dose of insulin (TDD)
Meal size preferences
Target and thresholds
Insulin type
Basal safety profile
The activation code required to use the system will be provided by your healthcare professional or distributor after you have received a prescription for the DBLG2 app and been trained on its use.

The sound on your phone needs to be tested to ensure that alarms will be audible.
The phone's sound must be working to use DBLG2 safely.
When you run the sound test, wait until the progress bar is completely full to determine if you can hear the alarm. At first, the volume is very low and the phone vibrates, and then the volume increases.
If the sound doesn't work, you won't be able to continue with the app's initialization. You'll need another phone with working sound to set up DBLG2. The sound on your phone is critical so that you can hear safety alarms and react promptly.
The Next button is greyed and becomes active once you've completed the required steps and scrolled to the bottom of the screen.
If you think you've filled in all the required fields, scroll to the bottom of the screen to activate the button.
If the Next button remains grayed, double-check the required fields. For the sound test, you must wait until the end of the test before you can tap Confirm.

Tap Log in if you've already had a DBLG1 or already used DBLG2 and use your previous credentials.
These same credentials are used to log in to YourLoops.
If you can't remember your password, you can use the Reset password button. If you already have an account, you will receive instructions by email to reset your password.
Tap Sign up if you need to create an account.
When you tap Sign up, you will receive a link by email inviting you to check your email address. Once you've verified your account using the link in your email, go back to the app and continue.
In both cases, the email address should be the one used by your healthcare professional / distributor to generate your activation code.
If the activation code doesn't work:
Check your network.
Check your email address and activation code.
The distributor or healthcare professional who provided your activation code can check the email address and code.
If the email address used to log in / sign up is incorrect, you will need to restart initialization. You can uninstall the app and then reinstall it to remove the app's data and start over.
If the email address used to generate the activation code is incorrect, your healthcare professional or distributor can correct it so that the email/code combination works.
Your Kaleido pump and insulin cartridges are only approved for use with Humalog® and NovoRapid® U100 insulins.
Yes, the information entered during initialization can be edited through the app's Profile menu.
When the app asks for a permission, tap Request. What happens next depends on your phone:
If a pop-up appears: tap Allow. Back in the DBLG2 app, tap Next to continue.
If your phone's settings open: find DBLG2 in the list of apps, turn on the permission named on the DBLG2 screen, then return to the DBLG2 app.
Some permissions are essential for the app to function safely and effectively.
Background operation: certain permissions prevent your phone from automatically shutting down the app. This ensures your continuous glucose monitoring remains active at all times. Turning off battery optimization for DBLG2 prevents your phone from stopping the app to save power.
Device connectivity: the app uses Bluetooth to communicate with your insulin pump and glucose sensor. Bluetooth must stay enabled for loop mode to receive glucose data and send insulin delivery instructions to your pump.
Safety alarms: notification and sound permissions allow you to see and hear safety alarms. These alarms warn you about serious incidents such as low blood sugar or pump issues so you can react promptly.
Data accuracy: permissions related to time settings ensure the app's history and insulin delivery logs are accurate.
Do not change any of these permissions after setup (initialization) as the app may trigger an alarm or its use may be blocked.
Here are some key things to know before pairing your sensor.
When the Dexcom G7 is used with the DBLG2 app, it cannot be used with the Dexcom app. Make sure you uninstall the Dexcom app if you were using it before.
To pair the sensor with the app, you must accept a Bluetooth pop-up during the pairing process.
Ensure that you keep a maximum distance of 10 meters between the sensor and your smartphone. Otherwise they may not be able to communicate.
To pair the sensor, follow these steps.





In the Dexcom G7 section, tap on Pair.
Tap Dexcom account. Log in to your Dexcom account with your credentials or create an account.
Tap Unbox and enter number. Enter the sensor number which is displayed on the applicator and tap Enter.
Tap Insert and start. Then proceed with inserting your sensor.
Start the sensor.
If you can't log in to your Dexcom account, you can reset your password from the login screen.
If you still can't recover your Dexcom account, you can:
create a new account, or
contact Dexcom.
You can insert the Dexcom G7 on your abdomen or back of upper arms. The sensor is not tested or approved for other sites. Discuss the best site for you with your healthcare professional.


Avoid areas:
If the applicator won't detach after having inserted the sensor:
gently peel off the adhesive patch with the applicator attached,
check the insertion site to make sure the sensor has not been left in the skin,
contact your healthcare professional.
Do not reuse the applicator.
If the sensor's pairing process fails:
make sure you don't have the Dexcom G7 app installed (and delete it if you do).
check the sensor code and try pairing again.
be sure to accept all permissions if you have permission requests.
be sure to confirm the Bluetooth pairing pop-up when it appears. If Bluetooth pop-up doesn't appear, temporarily disable Do Not Disturb mode if it was active.
If you have experienced Bluetooth connectivity issues with other devices (headphones, etc.), reboot your phone and restart the pairing process.
Try pairing the sensor again, making at least three separate attempts. If pairing still fails, contact your distributor.
The following table describes the various sensor statuses that you can see in your app.
No active sensor | There is no sensor paired with your DBLG2 app, or the sensor has stopped. |
|---|---|
Searching | DBLG2 is attempting to pair with your sensor. |
Initializing | Your sensor is in its 30-minute warmup phase. |
Sensor operating | Your sensor is operating normally and is sending readings. |
Stopping sensor | You have just tapped Stop and the sensor is in the process of stopping. This may take several minutes. |
Signal loss | Connection with the sensor has been momentarily interrupted. The Home screen displays the symbol (--). |
No reading available | Your sensor is not providing readings. The Home screen displays the symbol ??? instead of a value. |
To keep track of the sensor's warmup progress, a warmup countdown is displayed:
on the System screen in the sensor section, and
on the Home screen above the graph.
Once the warmup has finished, the countdown disappears, the Home screen will start displaying glycemia readings, and the sensor's status on the System screen will switch from Initializing to Sensor operating.
If the warmup phase takes longer than 30 minutes, try turning Bluetooth off, acknowledge the alarm and then turn Bluetooth back on. Wait for 10 minutes.
If there's still no progress after the 10 minutes, you should contact your distributor.
No, during the warmup phase, you will not receive G7 readings, nor alarms or alerts related to your glucose.
Remember, the sensor's warmup phase takes 30 minutes.
Here are some key things to know before pairing your pump.
Your app can only detect the pump if your phone is within 50 cm of the pump.
During pairing, you need to accept the pairing pop-up notification.
During pump pairing, the app asks you to confirm whether the cartridge and the infusion set are new and the size of the cannula before priming the cannula and starting insulin delivery.
Before pairing your pump, you need to insert your infusion set under your skin, fill your insulin cartridge and connect your pump to your infusion set, as shown below.
Insert an infusion set
Fill the cartridge and then insert it into the pump.
Inserting the cartridge into the pump activates the pump, making it ready for pairing with the DBLG2 app.
Connect the pump to the infusion device that's attached to the skin.
You can insert the infusion set on your abdomen, back of the upper arms, upper buttocks or lower back.
Blood flow in the thighs can vary enormously, particularly during physical activity, and stable absorption of insulin that can be correctly interpreted by the algorithm cannot be guaranteed. This is why you can't place the pump on the thighs when using the DBLG2 system.
Avoid wearing your infusion set in the following areas or locations.
Inserting an insulin cartridge turns the pump on and removing it turns the pump off. When inserted correctly, the pump will beep twice to indicate it's ready to connect to DBLG2.
If you can't see your pump in the list of pumps at the beginning of the pairing process, this means it's not available for pairing.
Check that the pump is charged and has a cartridge inserted in the cartridge compartment.
Remove and reinsert the cartridge and check that the pump beeps twice after inserting the cartridge.
If the pump does not beep, check that the pump is fully charged, or charge it if this is not the case.
If no light is displayed on the charging dock, the pump may not have been properly disconnected from its previous controller / DBLG1. In this case:
connect the pump to the previous controller / DBLG1 and then follow the instructions to correctly stop and unpair the pump in accordance with the user guide provided to you.
wait at least 30 to 60 seconds after stopping the pump before removing the cartridge.
Make sure the pump is close to your phone and restart the pairing process.
Make sure you accept all the requested permissions.
If you still can't see your pump in the list after having done the above, contact your distributor.
If your pump is grayed out in the list of pumps at the beginning of the pairing process, this means it has become locked and therefore cannot be paired.
From the Profilescreen, go to Help and contact > Unlock your pump. Follow the instructions shown on the screen. Note that you have a limited time to carry out some of the steps.
A green check mark means the step has been carried out successfully.
A red one indicates that you have to try again.
If you see the colored circle going round endlessly during a specific step, tap the BACK arrow to exit the procedure, then try again from the beginning.
If the pump remains grayed out despite having followed the Unlock procedure to the end, contact your distributor.
If pairing of your pump fails, try again, making at least three separate attempts.
If you have experienced Bluetooth connectivity issues with other devices (such as earphones), restart your phone and then try pairing again.
If Bluetooth connectivity issues persist with all devices, the problem may be related to your phone. If Bluetooth connectivity issues persist with your pump, contact your distributor.
The following table describes the various pump statuses that you can see in your app.
No pump paired | No pump is paired with the DBLG2 app; the app cannot send orders to the pump. |
|---|---|
Connecting | Transient state when pairing your pump or when the pump and the DBLG2 app are paired but have momentarily lost connection and are reconnecting. |
Priming | Transient state just prior to the pump delivering state. |
Pump operating | The pump is paired with the DBLG2 app. It is able to deliver insulin. |
Pump stopped | The pump is no longer delivering insulin but is still paired with the DBLG2 app. |
Shutting down | Transient state when your pump is being disconnected from the DBLG2 app. |
Searching | The pump is no longer connected to the DBLG2 app. It is delivering the last command sent by loop mode before connection was lost. The pump should reconnect automatically within a few minutes. |
Here are some key things to know before starting loop mode.
Your sensor and your pump must both be paired (loop mode comes last in the process).
Loop mode will be able to send recommendations once it has received enough glucose readings (after the 30-minute sensor warmup) and will be able to send commands to the pump once the pump has started. Make sure you start the pump!
The following are the various loop mode statuses that you can see on your app's Home screen.
: loop mode is running.
: loop mode is waiting for glucose values or for the pump.
: loop mode is OFF. Switch on loop mode to automate insulin delivery.

The Home screen displays various device statuses, your glucose levels and trends, insulin delivery information and events such as meals and physical activities. You can also access the add event button.

System device status

Latest glucose reading and trend arrow

History of glucose values

Events history

Insulin delivery information

Add event button
Sometimes, a badge with a number on it may be displayed on the Home icon at the bottom of the screen. This means that one or more temporary messages or statuses are available for viewing in the upper part of the Home screen.
The types of messages typically displayed on the Home screen include:
Bolus delivery information
Sensor warmup countdown
Hyperglycemia or hypoglycemia event
Night mode, Zen mode activation, etc.
If you're on another screen, tap the Home icon to access the Home screen, then tap a second time on the Home icon to zoom in on the information displayed at the top of the screen, under the glucose value.
To see the glucose value at a specific time on the DBLG2 Home graph, long-press anywhere on the graph. To view each glucose value continuously, drag your finger across the graph.
These features are only available from version 1.3.0 of the DBLG2 app.
Since DBLG2 version 1.3.0, you can change the scale of the Home graph. To change the scale, tap the maximum threshold on the graph, then choose the compact graph or the full range.
These features are only available from version 1.3.0 of the DBLG2 app.
The Events screen displays events declared by the user or triggered by the system.
You can view information and – sometimes – edit events.
You can also access the add event button.

Navigation
The day's events are displayed from the most recent (at the top) to the oldest (at the bottom). You can navigate through the days and filter your events by type.
Upcoming events are always displayed at the top of the screen and are separated from past events by a thick gray line.

Events that can be modified are indicated by the icon
. Tap on the event to edit it.

Events without the icon
cannot be modified.

Tapping on an alarm with the icon displays additional information about the alarm and actions to be taken to resolve the issue.
Add event button: e.g., declare a meal or some physical activity.
The Events screen displays:
Events that you've entered through the add event button (e.g., meals, physical activities, rescue carb intakes, pump boluses through the pump control mode or pen boluses).
Events linked to orders given by loop mode to the pump or sensor, such as administered boluses or sensor calibrations.
Events triggered by the system such as alarms, alerts or information messages, or meal boluses or correction boluses sent by the system.
A green check mark can appear next to an alert in the list of events on the Events screen when you have tapped on the notification that gets displayed on your phone and acknowledged the alert (i.e., you have acknowledged the notification). An action may still be required on your part to resolve the issue.
An alert without a green check mark may have been automatically acknowledged by the system or may be pending.
Some meals cannot be edited because a meal bolus recommendation has been confirmed for that meal. Even if the bolus was subsequently canceled / interrupted, the meal can no longer be edited.
A meal can be edited the same day ONLY if the associated meal bolus recommendation was NOT confirmed.
The System screen allows you to control your devices and start automated insulin delivery.

Loop mode section
Activate or deactivate loop mode (automated insulin delivery).

Pump section
Pair or stop your insulin pump or control your pump manually
.

Sensor section
Pair or change your sensor, calibrate your sensor.
The Dexcom G7 sensor lasts 10 days, followed by a 12-hour grace period that gives you time to replace it. DBLG2 informs you when it is time to change your sensor.
It is best to replace your sensor during the grace period and before alarm A1000 is triggered. This way, loop mode is not interrupted.
You can choose when you receive the A0118 reminder (Grace period expires soon), and set it to always sound even in silent mode, in Profile > Notifications > G7 sensor alerts.
To change your sensor:
On the System screen, in the Dexcom G7 section, tap More > Replace.
Wait until the sensor status shows Sensor stopped before removing the sensor from your skin. This may take up to 5 minutes.
Follow the on-screen instructions to pair your new sensor, and accept the Bluetooth pairing pop-up.
Wait for the 30-minute warm-up period. Glucose values are then displayed again.
If you are in loop mode, you do not need to stop it to change your sensor. If loop mode has been stopped, do not forget to restart it once your new sensor is ready.
Calibrating your G7 is optional. Calibration with your blood glucose meter may align your sensor readings with your blood glucose meter values.
The Kaleido starter kit contains two pumps: use one while the other is charging. A fully charged pump lasts one cartridge cycle, up to 3 days. At each change, you replace the pump, the cartridge and the infusion set.
DBLG2 informs you via the alarm system when it is time to change your cartridge. To change your pump:
On the System screen, in the pump section, tap Stop.
Disconnect the pump from your infusion site.
Remove the cartridge from the pump. This disconnects the pump from the DBLG2 app.
Prepare the other, fully charged pump with a new infusion set and a new fully-filled cartridge. Refer to the user guide for instructions.
On the System screen, in the pump section, tap Pair. Keep your phone within 50 cm of the pump and check that the color and the 12-digit serial number match.
Follow the on-screen instructions. The app asks you to confirm whether the cartridge and the infusion set are new, and the size of the cannula, before priming and starting insulin delivery.
You do not need to stop loop mode to change your pump. If loop mode has been stopped, do not forget to restart it once your new pump is operating.
Put the removed pump on charge right away, so it is fully charged for the next change.
You can remove your pump for a short time without changing your cartridge or pairing your pump again.
On the System screen, in the pump section, tap Stop. This stops insulin delivery.
Wash your hands, unclip the connector and close the protective cover.
Lift the pump away from your body patch. Leave the patch on your skin.
When you are ready, reconnect the insulin cartridge to your infusion set connector.
On the System screen, in the pump section, tap Start to resume insulin delivery.
You can use the DBLG2 app's pump control mode to:
Deliver or stop a bolus.
Apply (and stop) a temporary basal rate (only when loop mode is OFF).
To access this mode:
Tap the icon on the Home or Events screen and then select Pump bolus, or
Go to the System screen and in the pump section tap More > Pump control.
The Profile screen enables you to customize your DBLG2 application and view treatment- and application-related information.

Update your personal information and change your YourLoops email and/or password.
Manage your account (log out to switch phones, delete your account to stop using DBLG2).

Update your medical information and customize treatment settings.

Configure notifications.
Configure and switch on Zen mode and Night mode.

Configure data sharing.

Get help on the various system components / access the user guide.
View privacy and security information relating to the use of the application.
View legal information about your system.
To change your email address, go to Profile > My account.
Then:
Tap Change email.
Enter the email address currently linked to your account, and then enter your new email address and tap Confirm new email. A code will be sent to this new address.
Enter the code received and tap Change email.
To change your password, go to Profile > My account.
Then tap Change password. You will receive an email with instructions on how to reset your password.
If you log out of your account, your YourLoops session will be stopped and your data will be deleted from your phone. You will have to initialize the DBLG2 app again.
If you delete your account, you will stop using the system completely. All your data will be deleted from your phone and will no longer be accessible on YourLoops.
In both cases, you must stop loop mode and unpair the pump.
In Profile > Notifications you can set up alerts to sound even if your phone is in Do Not Disturb mode.
To set up notifications, go to Profile > Notifications > Phone notification settings. You'll see a shortcut to the notification settings of your DBLG2 app on your phone (permissions, sound and display of notifications, depending on the phone). You can configure your phone's notifications so that they display correctly.
Zen mode is designed to reduce the risk of hypoglycemia in specific situations, such as a long car journey, an office meeting or any other situation where using your system could prove difficult. Activating Zen mode raises your target glycemia by 20 mg/dL | 1.1 mmol/L. You can adjust this increase in target glycemia and the period during which Zen mode is active.
You can configure and switch on Zen mode from the Profile screen.
When Zen mode is active, a temporary message on the Home screen shows the time remaining. Tap this message to access the Zen mode settings directly.
Night mode enables you to define a custom time range for night time. When Night mode is switched on, the following alarms/alerts become less intrusive.
Once switched on, Night mode will automatically activate every night until it is turned off. |
If data sharing is turned off, the system stops transmitting your medical data to YourLoops.
The DBLG2 system allows you to stop transmitting your medical data to YourLoops for a specific period of time (3 hours, 12 hours, 1 day or 3 days). Set the data transfer to "Off" and choose a duration in the Data transfer settings sub-menu. After the specified time, the transfer of data resumes automatically using your preferred method (Wi-Fi or mobile network). The data collected during the "off" period is stored in your app only and will not be visible on YourLoops.
This mode is equivalent to the Confidential mode on DBLG1.
Notifications provide key system information (for example, messages triggered by the alarm system, latest glucose reading, active modes, etc.).
On your locked phone, they are displayed as shown.

DBLG2 alarm system notification. Tap the arrow on a notification to expand it and access its action buttons.

Permanent notification of the Dexcom G7 sensor.

Permanent notification of DBLG2.
The latest glucose reading and trend arrow and loop mode status are always displayed as a permanent notification.
Other information such as active modes (zen mode / night mode) or ongoing events such as physical activities or sensor warmup are also displayed.
The following table describes the alarm system icons that you can see in a notification.
| Alarm | High-priority alarm indicating a significant danger that requires immediate action. |
|---|---|---|
| Alert | Lower priority than an alarm. |
| Information message | Informs you about the status and use of your system. |
Permanent notifications are always displayed in the notification center. Swipe down from the top of your screen to open the notification drawer.
Alarm system notifications remain in the notification center until you tap the notification. Once tapped, the notification disappears, but you can find it again in the list of events on the Events screen.
Some notification sounds can be adjusted, while others cannot. This depends on the type of notification.
General behavior
Alarms always sound, regardless of your phone’s sound settings. The sound of alarms is not configurable.
The sound of alerts and information messages depends on your phone's sound settings.
Sound on: all DBLG2 alerts and information messages will sound. The volume of DBLG2 alerts and information messages corresponds to your phone’s ringtone volume. Therefore, to change the volume of alerts and information messages, adjust the ringtone volume in your phone's sound settings.
Vibrate or Silent mode: all DBLG2 alerts and information messages will be muted.
Possible customization
You can set some specific loop mode and G7 sensor alerts to always sound even when your phone is in Silent mode. To do this, go to Profile > Notifications > Loop mode alerts or G7 sensor alerts.
When set, the sound used to trigger these alerts is the same as for alarms and is not adjustable.
It depends on the type of notification:
You can configure the following alerts to always sound, even if your phone is in silent mode or Do Not Disturb mode: In Profile > Notifications > Loop mode alerts (when loop mode is ON):
In Profile > Notifications > G7 sensor alerts:
To check that alarms are audible on your phone, go to Profile > Notifications > Alarm sound check. Alarms should remain audible even if your phone is muted, in Do Not Disturb mode, or connected to a Bluetooth® speaker or headphones. |
If you can't see any notifications on your phone's locked screen, you can adjust the notification settings in your phone's settings. A shortcut to your phone's settings is provided in Profile > Notifications > Phone notification settings > Manage notifications.
When you declare a meal with loop mode turned ON, the algorithm calculates your insulin needs and, if necessary, sends you a meal bolus recommendation that you’ll need to confirm before it can be delivered. In the case of a two-part bolus, only the first part needs to be confirmed.
No, if loop mode is OFF, you won't receive a meal bolus recommendation when you declare a meal. However, if you turn loop mode back ON afterward, you may receive a meal bolus recommendation once loop mode is active.
You can also administer a "manual" bolus from the pump control mode if loop mode is OFF.
Yes, you can declare a meal while the sensor is in its warmup phase, but you won't receive a meal bolus recommendation during this time. Loop mode can recommend a meal bolus once it has received enough glucose data from the sensor.
If you've forgotten to declare your meal before actually having your meal, you can declare it afterwards.
Make sure you enter the correct quantity of carbs and the exact time of the meal.
If loop mode considers it appropriate, you may receive a meal bolus recommendation.
If you don't declare your meals, you won't receive any meal bolus recommendations, but loop mode will correct a rise in glucose by sending correction boluses.
When you declare some physical activity, loop mode raises your target glucose level in order to allow the activity to begin with a higher glucose level.
We recommend that you declare your physical activity at least one hour before the session starts, and before declaring any upcoming meal.
If your sensor readings don't match your symptoms, you should use a blood glucose meter to make treatment decisions.
If communication with the sensor is lost, here's what you can do.
Make sure your phone is close to the sensor.
If alarm 63000 – Bluetooth® is disabled is triggered, enable Bluetooth and wait a few minutes to see if sensor readings resume.
If no alert or alarm is triggered, wait up to 30 minutes: some alerts may take 15 to 30 minutes to trigger.
If an alert or alarm is triggered, follow the actions to be taken described in your user guide or in the Help menu (Profile > Help and contact).
If you previously used a Dexcom receiver, disconnect the sensor from it.
If you are unable to resolve the issue, contact your local distributor.
If your glucose levels are increasing and loop mode is ON, the DBLG2 system automatically delivers correction boluses.
No additional action is required from you, as the system efficiently manages this process.
If your glucose remains high without any obvious reason, follow these steps:
Consider manual insulin injection.
Check your glucose with a blood glucose meter.
Check your ketones.
Treat the glycemic situation as needed, as a priority.
Check the status of your system: pump, infusion set and tubing, and loop mode. Visually inspect your tubing for obstructed or bent areas, and check your cartridge for bubbles.
Change your infusion set and your cartridge if necessary.
If the hyperglycemia persists, contact your healthcare professional.
If loop mode detects a risk of hypoglycemia, you will receive a rescue carb recommendation with the quantity of rescue carbs to take.
Yes, you can configure the alert 20300 - Rescue carbs are recommended to always sound, even if your phone is in Silent mode or Do Not Disturb mode. To do so, go to Profile > Notifications > Loop mode alerts.
Note that other alerts, such as some G7 sensor alerts, can also be configured in the same way. Go to Profile > Notifications and then to G7 sensor alerts.
When an app update is available, you are informed directly on your phone:
A message from the app store is displayed on your screen. The information is also available in the app.
After an app update, you should:
Check that your sensor and pump have reconnected automatically and are working correctly.
Start loop mode if it is switched off.
Before updating your phone's OS, check that the new version is compatible with the DBLG2 app. You can find the list of compatible OS versions in the user manual, in Profile > Help and contact.
Do not update your phone to an unsupported OS version. Wait for Diabeloop to confirm that it is safe to update. An OS update can change your phone settings or shut down the app.
After an OS update, you should:
Restart the DBLG2 app.
Grant any new permissions requested.
Check that your sensor and pump have reconnected automatically and are working correctly.
Start loop mode if it is switched off.
The DBLG2 app can be used on only one phone at a time. To switch to a new phone:
Install the DBLG2 app on your new phone.
Initialize the app with the same activation code and your YourLoops credentials. Use the settings found on YourLoops, or ask your healthcare professional for help.
On your old phone, go to Profile > My account > Manage account and log out of your account. If your pump is delivering insulin, follow the on-screen instructions to stop and unpair it.
If you cannot unpair your Kaleido pump from your old phone (for example, if it is broken), you can unlock it from your new phone in Profile > Help and contact > Unlock your pump.
YourLoops is a web platform for DBLG1 or DBLG2 data visualization.
The platform allows you to:
Visualize information gathered from DBLG1 or DBLG2 (an automated insulin delivery system developed by Diabeloop).
Share data between DBLG1 or DBLG2 users, their caregivers, and the healthcare professionals who treat them.
YourLoops is a CE-marked, class IIa medical device. This medical device is not subject to reimbursement
Data is automatically uploaded every 5 minutes:
Through a SIM card (mobile network) on DBLG1.
Using your personal smartphone's cellular data or Wi-Fi with the DBLG2 app.
A caregiver is a person (e.g., close relation, family member, or school staff member) designated by a DBLG1/DBLG2 user to view their diabetes data on YourLoops.
Data access is managed directly by the user, who can invite a caregiver via email or revoke their data access at any time.
For optimal performance, we recommend accessing YourLoops on a computer using Google Chrome. Using alternative browsers or mobile devices may result in a degraded user experience.
The account creation process depends on whether you are a patient (DBLG1/DBLG2 user), a caregiver, or a healthcare professional.
For DBLG1 and DBLG2 Users (Patients):
Your YourLoops account is automatically created during the initialization of your DBLG1 or DBLG2 system.
To log in: Go to the YourLoops website and log in using the same email address and password you set up during your device initialization.
As part of the two-step verification process, you may be prompted to enter a security code sent to your email. You can check the box to keep your authentication valid for 30 days.
Go to the YourLoops website and click on Register. Enter your email address and create a password.
You will receive an activation email. Click on the link provided in the email to activate your account.
Go back to the YourLoops login page, enter your new credentials, and follow the on-screen steps to finalize your account (such as selecting the "Professional" or "Caregiver" profile type)
The way to request a password reset depends if you are a DBLG1/DBLG2 user, a caregiver or an healthcare professional.
For DBLG1 users:
Navigate to the reset menu on your handset:
Versions 1.12.xx and lower: Go to Menu > Settings > YourLoops
Versions 1.14.xx and higher: Go to Menu > Settings > DBLG1 > Credentials > YourLoops
Tap Reset password and then Receive Key. A one-time key will be sent to your registered email address.
Once you receive the email, tap CREATE NEW PASSWORD on your DBLG1 screen.
Enter the alphanumeric key (in uppercase with no spaces) and your new password.
For DBLG2 Users
In the DBLG2 app, go to: Profile > My account > Change password.
Tap Change password at the bottom of the screen.
Check your email inbox and click the link provided in the YourLoops email.
Enter your new password twice and tap Reset password.
Caregiver/ Healthcare professional:
To reset your password, follow these steps:
On the YourLoops login page, click Reset password
Enter your account email address and click Continue.
Open the email sent to your inbox, click the provided link, and follow the instructions to set a new password.
If you do not receive your verification key by email when changing your password in DBLG1, try the following:
Check that you are looking in the inbox of the email address associated with your YourLoops account. Don't forget to check your Spam folder.
Make sure the SIM card is correctly inserted into your DBLG1 and that the device is connected to a cellular network. If necessary, move to an area with network coverage and try again.
Wait about 10 minutes. If you still haven't received the email, request a new verification key.
If you still do not receive the verification key, please contact your local distributor for assistance.
Entering an incorrect password five times will lock your account.
To unlock your account, go to your email inbox and click on the unblocking link provided in the automated email.
Make sure that you check the mailbox corresponding to the email entered.
Check your spam folder.
If you still have not received anything after 24 hours, contact the appropriate support team.
Yes, you can switch from a caregiver account to a healthcare professional account:
When you are logged in YourLoops, click on your name and then on User account.
Following the account information, click on Switch to Professional Account. A pop-up window will open showing the changes to your account.
You must agree again to the terms of use and privacy policy
Yes. If you use DBLG1 or DBLG2 and are also a healthcare professional or caregiver, you must use two separate YourLoops accounts, each with its own email address:
Patient account: created directly on your DBLG1 or DBLG2 during initialization. It allows you to view and share your own data.
Healthcare professional or caregiver account: created on the YourLoops website, with an email address different from the one linked to your patient account. It allows you to view the data of the patients who share it with you.
You can share your data directly with individual caregivers, private practice healthcare professionals, or an entire hospital/clinic care team on YourLoops.
Sharing with an individual Caregiver or Healthcare Professional:
Log in to your account on the YourLoops website.
Go to the Teams/Caregivers menu and select
My caregivers.
Click + ADD CAREGIVER.
Enter the email address associated with their YourLoops account and click INVITE.
A care team is a group of healthcare professionals working in the same medical facility (e.g., a hospital diabetes department).
Sharing your data with a team ensures better care coordination and continuous follow-up.
You have the right to refuse data sharing, and you can revoke a care team's access to your data at any time on YourLoops.
You can share your data with an entire care team in two ways: by joining the care team yourself or by accepting an invitation sent by them.
Join a care team:
Tap on the menu Teams/Caregivers and tap on
Join a care team.
Enter the unique care team identification code provided by your healthcare team.
Accept an invitation from the care team:
Once invited, you will receive an email and an in-app notification on YourLoops.
Log into YourLoops, click the Notifications icon, and click ACCEPT.
Enter the unique care team identification code provided by your healthcare team to complete the connection.
Revoke access to a Caregiver:
Click on the dropdown menu at the top right of the screen then on My Caregivers. You will then see a list of people who have access to your data or those pending confirmation after receiving an invitation.
To cancel an invitation or revoke access, click on Remove caregiver. A prompt dialog box will ask you to confirm your choice. Click on Remove Caregiver to confirm deletion.
If you make a mistake, you can send another invitation to this person to access your data.
Revoke access to a care team:
Click on the dropdown menu at the top right of the screen. You will then see a list of Care teams who have access to your data.
Select the care team whose access you want to revoke.
Click on Leave Team. A prompt dialog box will ask you to confirm your choice.
If you make a mistake, you can register again the identification code to this care team to share your data.
You can also temporarily interrupt access to your data for all your connection by using confidential mode in DBLG1 / Data transfer OFF in DBLG2.
A care team identification code (or team code) is a unique security code (9 digits code) assigned to a specific medical care team (such as a hospital department or clinic) on YourLoops.
Why is it needed? It acts as a security check to ensure that your private health data is only shared with the exact care team you intended to join.
Where do I get it? You must obtain this code directly from your doctor, nurse, or healthcare provider. You will be asked to enter it whenever you join a care team or accept a care team's invitation on YourLoops
A care team is composed of one or more health professionals working in the same organization or department. For example, this could be the diabetes department in your hospital, with a manager and several diabetologists and nurses.
Once created, this team will be defined by a unique code that can be communicated to each patient followed by the team.
Private practice is a good option for patients who do not want to share their data with an entire care team.
When you log in for the first time, you are in the My private practice view, without any patients. You can create or join several care teams. To switch between your private practice and your care teams, use the My private practice / Care team menu.
To create a care team:
Click the drop-down menu in the top-right corner of your account, then select Create a care team.
In the pop-up window, enter the required information about your care team.
Accept the Terms of Use to confirm that you are a licensed healthcare professional authorized to practice in your country and eligible to create a care team.
Click Create.
Once your care team has been created, you will automatically be assigned the Administrator role. As an administrator, you can invite other healthcare professionals and grant or revoke administrator permissions at any time.
Your new care team will then appear in the drop-down menu in the top-right corner of the screen.
To join a care team, you must either:
Create your own care team, or
Be invited by a care team administrator.
If you are invited to join a care team, you will receive an email notification. This email is for information purposes only—you must also accept the invitation from your YourLoops account.
To accept the invitation:
Log in to your YourLoops account or create a Healthcare Professional account if you do not yet have one.
Open your notifications and select the pending care team invitation.
Click Accept.
You will not be able to access the care team until you have accepted the invitation in YourLoops.
Only team administrators can edit care team details. To make updates, navigate to your team profile and click Edit. You can update the team name, address, country, phone number, and email address. Once saved, these changes will automatically update for all accounts associated with the care team.
If you are a team administrator, navigate to Care Team Settings to perform the following actions:
Invite a member: Click Add healthcare professional, enter their email address, and optionally assign them administrator rights.
Update permissions: Check or uncheck the administrator box next to any member's name to give or remove admin access.
Remove a member: Click Remove from team next to the person you wish to remove.
Leave a team: Click Leave team to remove yourself from the care team.
To invite a patient to join the care team, first, make sure you are in the correct care team (select it from the dropdown menu in the top-right corner if necessary). You can then add a patient in two ways:
Share your team code: Go to the Care Teams tab to find your care team code. You can give this code to patients so they can manually join the care team.
Send an invitation: From the Home page with patients list, click Add new patient, enter their email address in the pop-up window, and send. Once sent, share the care team code (displayed in the Care team settings tab) with the patient. The patient will receive an email and will need to enter the code.
This error usually indicates that the patient has already been invited to your care team and the invitation is currently pending in their account.
To resolve this:
Ask the patient to log into YourLoops and accept the pending invitation or notification.
If they haven't received it, verify that you entered their email address correctly.
If the issue continues, please contact contact@diabeloop.fr.
YourLoops displays the data from your DBLG1 or DBLG2 system and calculates statistics.
It is organized into different tabs:
Dashboard: An overview of your last 14 days of data.
Daily: Your day-by-day detailed views.
Trends: Your long-term data patterns.
Profile: Your personal information.
Devices: Your system configurations and device details.
Each statistic in YourLoops is calculated based on specific clinical requirements or time period.
To see the exact details for any metric, simply hover your cursor over the information icon next to that statistic on the platform.
You can export patient data as a PDF, CSV file, or copy device settings directly to your Devices page:
Download PDF or CSV reports: Select a patient and click Download Report on the right side of the navigation bar. Choose a fixed period and select the output format (pdf or CSV) to download the file.
Copy device settings: In the Devices tab, select and click Copy to copy the displayed information directly to your web platform for easy pasting into records or notes.
No. YourLoops only displays your system settings: you cannot modify them from the YourLoops website. Changes can only be made in your DBLG1 or DBLG2 interface. In YourLoops, you can view your current settings and their change history in the Devices tab.
There are several reasons why your data may not appear in YourLoops:
The device is unable to transmit data. This can happen if the device has no network connectivity, for example while traveling abroad.
A specific mode has been enabled on your DBLG1 (Confidential mode) or DBLG2 (Stop Data transfer).
The email address associated with your DBLG1 is not valid. If the email address used during the initialization DBLG1 is wrong, data synchronization may fail.
If you've checked these points and your data still isn't appearing, please contact your local distributor for assistance.
Confidential Mode (DBLG1) and Data Transfer OFF (DBLG2) temporarily stop data from being uploaded to YourLoops.
You can choose to pause data transmission for 3 hours, 12 hours, 1 day, or 3 days. Once the selected period has ended, data uploads to YourLoops will automatically resume.
Please note that any data generated while Confidential Mode or Data Transfer OFF is enabled cannot be recovered or uploaded later.
These modes are available only on commercial versions of the DBLG1/DBLG2 medical device.
For DBLG1 users:
The SIM card in your DBLG1 provides coverage only in the following countries and territories:
Andorra, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Estonia, mainland France, Finland, Germany, Gibraltar, Greece, Guadeloupe, French Guiana, Hungary, Guernsey & Jersey Islands, Reunion Island & Mayotte, Isle of Man, Ireland, Iceland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Martinique, Monaco, Norway, Netherlands, Poland, Portugal, the Czech Republic, Romania, the United Kingdom, San Marino, Saint Pierre and Miquelon, Slovakia, Spain, Sweden and Switzerland.
If you travel outside these covered areas, your device will stop uploading data to YourLoops. During this time, your data is safely stored on your DBL medical device but will not be visible in YourLoops.
Once you return to a covered country or territory, data synchronization will automatically resume on the first day of the following month. At that point, all historical data stored on your device during your trip will be uploaded to YourLoops.
Example: If you travel to the United States from January 7 to January 15, data uploads will stop while you are abroad. Synchronization will restart on February 1, and the historical data stored on your device from January 7 through January 31 will then be uploaded to YourLoops.
For DBLG2 users:
If you travel outside your mobile coverage area, your device will stop transmitting data to YourLoops via cellular network. You can continue uploading your data by connecting to a secure Wi-Fi hotspot.
In areas with poor or nonexistent network connection (such as at sea or in remote regions), data transmission may be temporarily affected. All data remains safely stored on your device and will automatically sync to YourLoops as soon as you connect to a reliable Wi-Fi network or covered cellular network.
If your data is no longer displayed in YourLoops, try the following:
Check that your DBLG1/DBLG2 is connected to a mobile network (or Wi-Fi for DBLG2).
Make sure you are in an area with cellular network coverage, especially when traveling abroad (or use Wi-Fi in DBLG2).
Verify that Confidential Mode (DBLG1) or Data Transfer OFF (DBLG2) is not enabled.
Ensure that the DBLG1 SIM card is correctly inserted into the SIM card slot.
If you have recently replaced your DBLG1, make sure you used the same password during initialization as the one associated with your YourLoops account. If necessary, you can reset your password.
After certain system updates, you must complete a brief training acknowledgement before accessing your data. To restore access:
Tap Open training on the notification prompt (opens in a new window).
Read through the provided training materials.
Return to the YourLoops window and check the box to confirm you completed and understood the training.
Once confirmed, you will be able to access your account and data as usual.
You can change your first and last name and your date of birth (not available in the clinical environment).
Click on your name at the top right of the screen then on User account in the dropdown menu, Change the information.
Click on save.
To change your email address or password, go to your DBLG1 or DBLG2:
For DBLG1 users:
Navigate to the reset menu on your handset:
Versions 1.12.xx and lower: Go to Menu > Settings > YourLoops
Versions 1.14.xx and higher: Go to Menu > Settings > DBLG1 > Credentials > YourLoops
Select CHANGE LOGIN (email address) or CHANGE PASSWORD and follow the instructions on the screen.
For DBLG2 users
In the DBLG2 app, go to: Profile > My account > Change email or Change password.
Check your email inbox and follow the instructions.
You can modify the language on YourLoops.
Click on your name at the top right of the screen then on User account in the drop-down menu.
Change the information
Click on SAVE.
Depending on your situation, deletion of your account may interfere with the terms of use of your system. We invite you to consult the Terms of Use of your DBL medical device as a preamble.
If you have any questions regarding the deletion of your account and/or your data, please send us a request by email to dpo@diabeloop.fr.
You can change your name.
Click on Your Name at the top right of the screen then on User account in the dropdown menu.
Change the information.
Click on SAVE.
To change password or email:
Log in to your YourLoops account
Click in the top right corner of the screen on Your name and then on User account in the dropdown menu.
Click on Change password or Change e-mail
You will receive an email with a link
You can modify the language on YourLoops.
Click on your name at the top right of the screen then on User account in the dropdown menu.
Change the information
Click on SAVE.
To simplify the data visualization, you will be able to choose the unit in which to view the glucose values.
Click on Your name at the top right corner of the screen and then on User account in the dropdown menu.
Choose the unit you wish to view in mg/dL or mmol/L.
Click on Save.
If you would like to stop using YourLoops and delete your account, please send your request by email to dpo@diabeloop.fr. We will work to process your request as soon as possible in accordance with the General Data Protection Regulation (GDPR).
You will always be able to access the training materials at the footer of the YourLoops website by clicking on Training:
From the login page, for the unique guide to creating an account, accessible to all profiles.
When you’re logged in, for the guide specific to your profile: healthcare professional, caregiver or patient.
Diabeloop collects and processes personal data in accordance with the General Data Protection Regulation (GDPR).
For details on how your data is handled, please refer to the data privacy policy of your product and/or the Diabeloop privacy policy (https://www.diabeloop.com/privacy-policy).
Receive content on diabetes, Diabeloop society and its news